PRINT PAGE SHARE THIS ACCESSIBILITY AT UNOG A A A A The United Nations in the Heart of Europe




ExpandIn Focus

ExpandResources & Services

ExpandThe Director General

ExpandAbout UNOG

ExpandPalais des Nations


Disarmament

Generic Preventive Measures - Checklist

To assist States with the implementation of Article 9 and Part 3 of the Technical Annex, in 2009 the then Coordinator on Generic Preventive Measures, Colonel Jean-Christophe Le Roux of France, developed a questionnaire which serves as a checklist for States to consider when they are developing procedures, guidelines or regulations on the implementation of generic preventive measures. The checklist has been reproduced in full below. It can also be found in Protocol V document CCW/P.V/CONF/2010/6/Add.1, 11 November 2010. Essentially the checklist is a tool to facilitate the implementation of generic preventive measures. While it does not have any legal status, it is hoped that the checklist will clarify various issues, establish best practises and serve to monitor and improve the implementation of generic preventive measures at the national level.

Show details for 1. Specification1. Specification

Show details for 2. Concept2. Concept

Show details for 3. Development3. Development

Show details for Reducing UXO sensitivityReducing UXO sensitivity

Show details for Reducing potential civilian casualties from ERWReducing potential civilian casualties from ERW

Show details for Qualification workQualification work

Show details for 4. Production4. Production

Show details for 5. Utilisation - 5.1 Storage5. Utilisation - 5.1 Storage

Show details for 5.2 Transportation and handling5.2 Transportation and handling

Hide details for 5.3 Training5.3 Training
(a) Is the user trained to perform visual checks of munitions before use or firing?
(b) Is the user trained to test the weapon system and/or munitions before use or firing?
(c) Is the user trained to use munitions? Does he know the limits of use defined in user manual?
(d) Are negatively influencing factors on munitions, such as mechanical, thermal, electrical, climatic, biological, polluting, radiating or poisoning hazards, known to the users?
(e) Is the user trained to identify ERW and apply procedure of treatment (e.g. mark, isolate, inform…)?
(f) Are there training programmes adapted to different profile of users (operational, headquarters, maintenance…) and level of knowledge to have?
(g) Do training programmes involve all personnel in the entire chain involved with the life cycle of munitions?
(h) Are there specific training programme for specific munitions?

Show details for 5.4 Using5.4 Using

Show details for 6. Support - 6.1 maintenance of weapon system, munitions and packaging6. Support - 6.1 maintenance of weapon system, munitions and packaging

Show details for 6.2 In service surveillance6.2 In service surveillance

Show details for 6.3 Documentation6.3 Documentation

Show details for 7. Disposal Identification7. Disposal Identification

Show details for ProceduresProcedures

Show details for Information to other partiesInformation to other parties

Show details for 8. COTS and MOTS8. COTS and MOTS

Show details for 9. Others questions for storage related to safety9. Others questions for storage related to safety

List of abbreviations
ALARP: As Low As is Reasonably Practicable
AXO: Abandoned explosive Ordnance
BIT: Built In Test
CCW: Certain Conventional Weapons
COTS: Commercial Off The Shelf
EOD: Explosive Ordnance Disposal
ERW: Explosive Remnants of War (see definition in convention on CCW)
HCP: High Contracting Party
MOTS: Modified Off The Shelf
RFID: Radio Frequency Identification Device
UXO: Unexploded Ordnance (see definition in convention on CCW)


Events & Meetings